Switchboard
Safety switches and RCDs: what the rules say in each state
A safety switch, or RCD, cuts the power when it senses current leaking to earth, which is what happens when electricity goes through a person. Circuit breakers do not do that job. Queensland and Western Australia both tie safety switches to selling and renting a home, and the testing advice ranges from every three months to every six.
Breaker, safety switch, surge diverter
Three devices live in a modern switchboard and people mix them up constantly. Energy Safe Victoria's wiring page separates them cleanly.
| Device | Protects | How you spot it |
|---|---|---|
| Safety switch (RCD) | People | A test button, and "30mA" printed on it |
| Circuit breaker | Wiring and appliances, against short circuits and overloads | No test button |
| Surge diverter | Equipment, against voltage spikes such as lightning | Usually labelled |
A safety switch turns the power off within 0.03 of a second. Queensland's regulator puts the distinction in one line: circuit breakers protect circuit wiring and appliances, while safety switches protect people. Some newer devices combine both functions in one unit, so a board can be well protected without looking crowded.
A safety switch only covers the circuits wired through it. One switch on the power points does nothing for the lights, the oven or the pool pump.
Queensland: the 90 day rules
Queensland has the most detailed law, set out by the Electrical Safety Office:
- Safety switches have been compulsory on power point circuits in new homes since 1992, and on power point and lighting circuits in homes built since 2000.
- Buying: if the home has no safety switch on the power point circuits, the buyer must install one within 90 days of the property transfer.
- Selling: the seller must establish whether one is installed and declare it on the standard sales contract and the Form 24 property transfer.
- Renting: the landlord must make sure safety switches are installed on all power point circuits within 90 days of the tenancy agreement's start date.
Skip it and the landlord risks a fine of up to $1,500.
Western Australia: at least two
WA counts them. Homes must have at least two RCDs protecting all circuits that supply power points and lights. The trigger points are:
- Sale: RCDs must be installed before the land title is transferred.
- Rental: landlords must ensure RCDs are fitted in the switchboard of their rental premises.
- Short-term rental accommodation: fitted before guests stay.
If a home has fewer than two, a licensed electrical contractor has to install them.
Victoria: checked every two years in rentals
Victorian rental providers must arrange an electrical safety check every two years, and Energy Safe Victoria's summary of that check says all switchboards must have RCDs fitted. More in rental property electrical rules.
Other states
NSW and Tasmania both tell households to have safety switches on every circuit, installed by a licensed electrician. We could not find a sale or lease trigger on the regulator pages we read for NSW, South Australia, Tasmania, the ACT or the NT, so we make no claim about one. New work everywhere has to follow the Wiring Rules, AS/NZS 3000, and your electrician will know what that requires for your board.
How often to test
Advice differs, which tells you nobody thinks "never" is acceptable.
| Source | Test interval |
|---|---|
| NSW Government | At least every six months |
| Electrical Safety Office Queensland | Every three months |
| Building and Energy WA | Every three months recommended |
The method is the same everywhere. Warn the household. Press the T or Test button on each safety switch. It should flick off at once. Walk around and see what lost power, because that shows which circuits are protected. Then reset. If a switch does not trip, or will not reset, call a licensed sparky.
Queensland adds a practical tip: wait two to three minutes before resetting a circuit with a fridge or air conditioner on it. And a reassuring one: a safety switch is built to last 4,000 tests.
Can I fit one myself
No. Installing a safety switch is electrical work. See DIY electrical work and the penalties.
Quick answers
How many safety switches does a house need in WA?
At least two RCDs, protecting all circuits supplying power points and lights. They must be in place before a home's title is transferred on sale, and in rental premises.
How long does a Queensland buyer have to install a safety switch?
Within 90 days of the property transfer, if the home does not already have a safety switch on its power point circuits.
Is a circuit breaker the same as a safety switch?
No. A circuit breaker protects wiring and appliances from short circuits and overloads. A safety switch detects leakage current and protects people from electric shock. A safety switch has a test button.
Keep reading
- SwitchboardSwitchboard upgrades: when and what to expect
- Fire safetySmoke alarm laws by state and territory
- PaperworkCertificate of electrical safety: every state's version
Written by the Sparkies Down Under editorial desk from the regulator pages listed below, read in November 2026. Rules change. The regulator's current page overrides this one. Method.
Sources
- Household wiring, Energy Safe Victoria. Read November 2026.
- Frequently asked questions: safety switches, Electrical Safety Office Queensland. Read November 2026.
- Electrical safety in rental properties, Electrical Safety Office Queensland. Read November 2026.
- RCD safety switches, Government of Western Australia. Read November 2026.
- Residential property safety checks, Energy Safe Victoria. Read November 2026.
- Safety switches protect you, NSW Government. Read November 2026.