Renting
Electrical safety rules for rental properties
Landlords carry specific electrical duties that owner-occupiers do not. Victoria requires an electrical safety check by a licensed or registered electrician every two years. Queensland gives landlords 90 days from the start of a tenancy to have safety switches on power point circuits. Western Australia requires RCDs in the switchboard of every rental.
Victoria: the two year check
Victoria's rule is the broadest. A landlord must ensure gas and electrical safety checks are carried out every 2 years, and:
- only a licensed or registered electrician or gasfitter can do them
- the landlord, proprietor or agent must keep the record
- the record must be shown to a tenant who asks
The electrical check covers all electrical installations, fixtures and fittings, and the switchboard must have RCDs fitted. Consumer Affairs Victoria administers the rule under the Residential Tenancies Regulations 2021, and its page for rental providers covers the gas side in the same detail.
A tenant in Victoria is entitled to see the date of the last check. If there is no record, that is worth raising in writing.
Queensland: safety switches within 90 days
Owners of domestic rental accommodation in Queensland must have a safety switch installed. The law requires safety switches on all power point circuits within 90 days of the start date on the tenancy agreement, and a landlord without one may be fined up to $1,500.
Tenants who believe there is no safety switch can talk to the landlord or agent, or call the Electrical Safety Office on 1300 362 128.
Queensland rentals also sit under the state's interconnected photoelectric smoke alarm rules.
Western Australia: RCDs, including short stays
WA landlords must ensure RCDs are installed in the switchboards of their rental premises, and the state standard is at least two. If they are missing, tenants should contact the agent or landlord and request them.
The rule reaches short-term rental accommodation as well. If you make part or all of a home available for short stays, RCDs must be installed before guests stay.
WA suggests tenants test the RCDs every three months and tell the property manager if one does not operate. Faulty RCDs must be replaced immediately.
Tasmania: smoke alarms on the owner
Tasmanian owners of tenanted premises must install and maintain smoke alarms that are mains powered with a back-up, or run on a 10 year non-replaceable battery. A 9 volt replaceable battery alarm does not meet the rental standard.
What tenants can and cannot do
A tenant can test safety switches, reset them, change light globes and report faults. A tenant cannot arrange their own wiring changes any more than an owner can do DIY electrical work.
Report these in writing, straight away:
- a tingle or shock from a tap, appliance or switch (then follow shocks and tingles)
- a safety switch that will not reset
- scorch marks, buzzing or heat at a power point
- no safety switch on the board at all
For landlords: keep the paper
Every job on a rental should leave a certificate behind, and those certificates are your evidence that the property was maintained. File them with the lease. The names and deadlines are in certificates of electrical safety.
Quick answers
How often must a Victorian rental have an electrical safety check?
Every 2 years, carried out by a licensed or registered electrician. The landlord or agent must keep the record and show it to a tenant on request.
How long does a Queensland landlord have to install a safety switch?
Within 90 days of the start date on the tenancy agreement, covering all power point circuits. A landlord without one may be fined up to $1,500.
Do short-stay rentals in WA need RCDs?
Yes. If part or all of a premises is made available as short-term rental accommodation in WA, RCDs must be installed at the switchboard before guests stay.
Keep reading
- UrgentTingle from a tap? What to do right now
- WeatherElectrical safety before and after storms and floods
- LicensingRestricted electrical licences: what they allow
Written by the Sparkies Down Under editorial desk from the regulator pages listed below, read in November 2026. Rules change. The regulator's current page overrides this one. Method.
Sources
- Residential property safety checks, Energy Safe Victoria. Read November 2026.
- Rental providers: gas and electrical safety, Consumer Affairs Victoria. Read November 2026.
- Electrical safety in rental properties, Electrical Safety Office Queensland. Read November 2026.
- RCD safety switches, Government of Western Australia. Read November 2026.
- Smoke alarms in rental properties, Consumer Affairs Tasmania. Read November 2026.