SPARKIESdown under
  1. Home
  2. Know-how
  3. Restricted electrical licences

Licensing

Restricted electrical licences: what your plumber or air con installer can do

A restricted electrical licence lets a tradie from another trade disconnect and reconnect the electrical side of the equipment they work on, such as a hot water unit or an air conditioner. It does not allow new wiring, new circuits or new power points. Those need a full electrician.

The idea

A plumber replacing an electric hot water system has to deal with the cable feeding it. Calling an electrician to undo and redo three wires on every job would be silly, so the states created a narrow licence for that task.

Energy Safe Victoria's wording is the tightest. Its Restricted Electrical Worker's licence, once known as the D licence, covers low-voltage disconnect and reconnect work on equipment connected to a fixed installation, associated with the holder's primary trade. The licence "only allows the disconnection and reconnection of like for like equipment, for the purposes of repair, replacement or maintenance".

And the limit: it does not allow electrical wiring and installation work, including the installation of new wiring or equipment. All fixed electrical installation work requires a licensed electrician.

State versions

Queensland has a restricted electrical work licence that limits the holder to specific electrical work associated with a trade or calling. The official example is a refrigeration mechanic working on the electrical equipment of refrigeration systems. There is a matching restricted electrical contractor licence for a business doing a particular kind of electrical work.

ACT restricted classes are named for the trade they attach to: electrical fitting, mechanical fitting, plumbing and gasfitting, refrigeration and air conditioning, and type B gas appliances. Each allows incidental electrical wiring work in relation to disconnection and reconnection for that trade.

Tasmania lists an electrical restricted licence as one of its four electrical licence types.

Western Australia issues restricted electrical licences, and the scope a holder is authorised for is printed on the licence card.

A worked example from the regulator

WA's regulator was asked whether a restricted licence holder could remove and refit a socket outlet while installing a glass splashback. The answer was no. A licensed electrician is needed to isolate the supply, test that it is de-energised, remove the socket outlet and refit it afterwards.

That one answer explains the whole system. A power point is part of the fixed wiring, and it is not "equipment" belonging to the splashback installer's trade.

So who do I need

JobRestricted licence enough?
Replace an electric hot water unit with the same type, same spotUsually yes, for the disconnect and reconnect
Swap a failed air conditioner for a like unit on the existing circuitUsually yes
Install a new split system where there was noneNo. The new circuit needs an electrician
Move a hot water unit and extend the cableNo
Add or move a power pointNo
Take a power point off the wall for tiling or a splashbackNo, on the WA ruling above

"Usually" because each licence carries its own conditions. The card is the authority.

What to ask

  1. Is your electrical licence full or restricted?
  2. If it is restricted, what does the card say it covers?
  3. Does my job involve any new cable or a new circuit, and who is the electrician for that part?

A mixed job, such as a new air conditioner, often needs both trades. The new circuit should come with its own certificate from the electrical contractor, and the split between worker and contractor is explained in electrician or electrical contractor.

Quick answers

Can an air conditioning installer do the electrical work?

Only within a restricted licence, which covers disconnecting and reconnecting like-for-like equipment. A new air conditioner that needs a new circuit requires a licensed electrician for that wiring.

Can a plumber connect an electric hot water system?

A plumber holding a restricted electrical licence can generally disconnect the old unit and reconnect a like-for-like replacement. Running new cable or altering the circuit is work for a licensed electrician.

Keep reading

Check a licenceAll guides

Written by the Sparkies Down Under editorial desk from the regulator pages listed below, read in November 2026. Rules change. The regulator's current page overrides this one. Method.

Sources

  1. Restricted Electrical Worker's licence (REL), Energy Safe Victoria. Read November 2026.
  2. Classes of electrical work licences, Business Queensland. Read November 2026.
  3. Electrician licence: classes and endorsements, ACT Government, City and Environment Directorate. Read November 2026.
  4. FAQs for electrical licence holders, Government of Western Australia. Read November 2026.
  5. Electrical licence: contractor, Consumer Affairs Tasmania. Read November 2026.
  6. Electrical licensing, Government of Western Australia. Read November 2026.