SPARKIESdown under
  1. Home
  2. Northern Territory

NT licensing

Electrician licensing in the Northern Territory

The Territory rebuilt its electrical laws recently. The Electrical Safety Act 2022 commenced on 1 July 2024 and NT WorkSafe now does the licensing. A business needs an electrical contractor licence if it performs electrical work for a fee, and nearly all electrical work must be followed by a certificate of compliance.

RegulatorNT WorkSafe (Electrical Safety Regulator)
Official licence checkCheck an electrical contractor licence (Territory Services)
Certificate after the jobCertificate of Compliance (CoC)
Certificate ruleRequired for all electrical work except like-for-like replacements
Listings on this siteNone. No reusable bulk register file. Why

Who needs the contractor licence

NT WorkSafe's test has two limbs. A business needs an electrical contractor licence if it performs electrical work for a fee, or if it employs a licensed electrical worker who performs work for a fee. The licence can go to an individual such as a sole trader, a partnership or a body corporate, and runs for a maximum of three years.

The bar to get one

  • The applicant must have held an unrestricted electrical work licence for at least two years. For a partnership or company, at least one employee named on the licence must meet that.
  • The work must be performed by electrical work licence holders, or by apprentices supervised by one.
  • The applicant, or an employee, must have completed the contractor course units approved by the Electrical Safety Regulator.
  • Public and products liability insurance of at least $5,000,000.

Each licence is endorsed with a nominated person, also called a nominee, who is an owner, partner or employee holding a current unrestricted licence.

Two years on the tools before contracting is a higher bar than it sounds. It means a freshly licensed sparky in the Territory cannot simply start a business the next morning.

Certificates: the 2024 change, and the 2026 tweak

Before the new Act, certificates covered a narrower band of work. Under the Electrical Safety Act 2022 a certificate of compliance is required for all electrical work, the range of licence types that must complete one was widened, the form went online, and a copy of every certificate goes to NT WorkSafe.

Then came a correction. The Act was amended in April 2026 to exempt like-for-like replacement of an existing fitting or appliance with a similar one at the same location. Swapping a dead power point for the same kind of power point no longer triggers a certificate, unless you as the customer ask for one. You are entitled to ask.

Work that still needs a certificate includes wiring and fitting out installations, replacing switchboards or the protection devices in them, repairs to meter boxes and service mains, generator connections, and solar panels, inverters and batteries.

What the public check shows

The Territory Services check returns the licence holder name, status, licence number, issue date, expiry date, business phone number and registered location. It also notes that some businesses on it may be registered outside the NT.

Why the Northern Territory has no listings here

We searched the NT open data portal for electrical licence files and found none. The licence check is a search service with no stated licence for republishing, so we link to it and leave the records where they are.

Checking a licence in Northern Territory

The official check is Check an electrical contractor licence (Territory Services). Our step by step for NT is on the check a licence page.

Questions about NT electrical licensing

Who regulates electricians in the Northern Territory?

NT WorkSafe, acting as the Electrical Safety Regulator under the Electrical Safety Act 2022, which commenced on 1 July 2024.

Does replacing a power point in the NT need a certificate of compliance?

Not if it is a like-for-like replacement of an existing fitting with a similar one at the same location. That exemption was added in April 2026. A certificate is still issued if the customer specifically requests one.

How long must someone be licensed before getting an NT electrical contractor licence?

The applicant must have held an unrestricted electrical work licence for a minimum of two years. For a partnership or body corporate, at least one employee endorsed on the licence must meet that.

Sources

  1. Electrical contractor licence, NT WorkSafe. Read November 2026.
  2. Certificate of compliance, NT WorkSafe. Read November 2026.
  3. Check an electrical contractor licence, Northern Territory Government, Territory Services. Read November 2026.