SPARKIESdown under
  1. Home
  2. Know-how
  3. Solar and battery installers

Solar

Solar and battery installers: two credentials, not one

A solar or battery installer needs two separate things. The first is an electrical licence, because connecting panels, inverters and batteries is electrical work. The second is accreditation with Solar Accreditation Australia, which is what makes a system eligible for Small-scale Technology Certificates. Some jurisdictions add a third layer on the licence itself.

Credential one: the electrical licence

There is no such thing as a solar installer who is not an electrician. Queensland's Electrical Safety Office says it in a bracket: your solar installer "must be a licensed electrician". The same goes for batteries, where the office's advice opens with "make sure a licensed electrician installs your battery energy storage system".

The business also needs whatever contractor licence or registration its state requires. Check both with the lookups on our check a licence page.

Credential two: SAA accreditation

Since the accreditation scheme moved to Solar Accreditation Australia, the rule reads: any individual who wishes to design or install grid-connected photovoltaic systems, grid-connected battery systems or standalone power systems must be accredited under the SAA scheme for the system to be eligible for Small-scale Technology Certificates.

SAA tells consumers the same thing from the other side: installers must be accredited if you wish to access rebates under the Small-scale Renewable Energy Scheme, and many state rebate programs also require the installer to be an accredited person. An unaccredited installer costs you that eligibility.

Accreditation is held by an individual. Ask for the name of the accredited person who will be on your roof, not the brand on the brochure.

Credential three, in some places

ACT. Solar work needs an endorsement on the electrical licence. The distributed energy resource endorsement covers solar photovoltaic panel installations, grid-connected inverters and grid-connected battery storage. Our list of solar endorsed ACT contractors shows which business licences carry that wording. Some endorsements on the register mention panels and inverters only, with no reference to batteries, so read the endorsement text if a battery is part of your plan.

Victoria. Solar and battery systems are prescribed work. An independent Licensed Electrical Inspector must inspect the installation before it is turned on.

NSW. From November 2026, new and upgraded rooftop solar, batteries and associated inverters up to 200 kW must be commissioned through the NSW CER Installer Portal, which generates the compliance certificate as part of the process.

Northern Territory. Solar panels, inverters and battery systems operating above extra-low voltage are on NT WorkSafe's list of work that requires a certificate of compliance.

After the install

A solar system sits in the weather for decades. Queensland's regulator notes there is no legal requirement for a homeowner to have solar inspected, but equipment exposed to harsh UV degrades, and poor maintenance can end in electric shock or fire. Cleaning can be done by a competent person. Anything involving the electrical side, including cracked panels, loose fittings and exposed cables, goes back to a licensed electrician.

Know where your isolator switches are and keep them accessible. Before a storm, shut the system down using its safe isolation procedure.

A short checklist

  1. Electrical contractor licence checked on the state register.
  2. Name of the SAA accredited installer, in writing.
  3. In the ACT, the endorsement wording on the licence.
  4. Which certificate you will receive and whether an inspection is part of it.
  5. A handover that covers shutdown, the isolators and maintenance.

Quick answers

Does a solar installer need to be an electrician?

Yes. Installing and connecting a solar PV system is electrical work. Queensland's Electrical Safety Office states that a solar installer must be a licensed electrician.

What is Solar Accreditation Australia?

The body that accredits people who design or install grid-connected solar, grid-connected batteries and standalone power systems. Accreditation under its scheme is required for a system to be eligible for Small-scale Technology Certificates.

Can any ACT electrician install a home battery?

No. In the ACT the electrician's licence needs the distributed energy resource endorsement, which covers solar panel installations, grid-connected inverters and grid-connected battery energy storage systems.

Keep reading

Check a licenceAll guides

Written by the Sparkies Down Under editorial desk from the regulator pages listed below, read in November 2026. Rules change. The regulator's current page overrides this one. Method.

Sources

  1. Solar PV systems, Electrical Safety Office Queensland. Read November 2026.
  2. Solar Accreditation Australia, Solar Accreditation Australia. Read November 2026.
  3. Electrician licence: classes and endorsements, ACT Government, City and Environment Directorate. Read November 2026.
  4. Certificates of Electrical Safety for the community, Energy Safe Victoria. Read November 2026.
  5. Electrical compliance requirements, NSW Government. Read November 2026.